How to Make Headphones Louder?
1. Make changes in your Audio Playback Settings
You can always adjust the volume settings of your plugged-in audio device and configure these settings up to the higher levels for louder sound output.
If you are using an iPhone then you need to go to the main settings of your iPhone to configure these volume settings. Under the main settings, you will be able to find the ‘Music’ option. Select the option and look for the ‘Playback’ option on the screen that appears. In playback settings, you will find a ‘Volume Limit’ option, which you need to modify. Volume modification can now simply be made by adjusting the maximum volume level.
In the case of an Android Phone, go to the settings of your device and then navigate to the ‘Volume’ settings. You can find these settings under the ‘Sounds’ option. Now all the volume settings options will be accessible to you and you can make changes according to your requirements.
2. Connect A Headphone Amplifier
If there isn’t any significance in the volume of the headphone after adjusting the playback settings of your device then you need to try a headphone amplifier for your device just like speakers. Using amplifiers with your headphones could enhance your device volume up to higher levels.
The output volume of your headphone directly depends upon the size of the amplifier you use. The smaller the amplifier, the lower the volume output.
Normally, the output sound from the headphone will become distorted if you keep your device volume at maximum volume settings and the intensity of the sound will still be below your expectations. So, using an amplifier with your headphone becomes the ultimate choice for you.
Headphones that have a high impedance level, which is up to 300 ohms, will require a little lift to move the drivers. This is commonly found in planar attractive earphones, which are pretty mainstream at present. In case you’re utilizing a more effective arrangement of headphones that only operate within 20-25 ohms range then using an amplifier won’t be a good option for you.
3. Use volume enhancer software or application
There are applications explicitly intended to help in increasing the volume. By downloading and using the services of these applications, you can coordinate with your device in case you’re utilizing a smartphone, a laptop, or a PC.
Using such an application, you can abrogate some pretty unique settings and make changes to them. Once more, be cautious with applications like these and utilize these applications with a specific degree of volume to make your ears safer.
There are different applications accessible in the Apple Store and the Google Play store that can be downloaded and utilized efficiently. Contingent upon the application you pick, it’s ordinarily easy to set everything up and incorporate the application with your output device.
4. Use Sound Isolation Headphones
In case you’re using a lower quality pair of earphones or an old one, it doesn’t make a difference the amount you mess with the settings, you’re going to have a horrible pair of earphones. Using a sound isolation headphone might be a better option for you.
With such headphones, you likewise run to a lesser degree a danger of harming your hearing since you don’t need to tune in at such high volumes to be fulfilled.
5. Thoroughly clean your headphones or speakers
Dust or debris stuck in your headphones or speakers might be a reason for the volume issue you have been facing lately. So, it’s better to clean your headphones thoroughly using a small piece of cloth or cotton swabs.
If the sound output device you have been using is a headphone, then the very first thing you need to do is to separate the ear pads and thoroughly wipe the headphones and ear pads using alcohol and a piece of cloth. Use the cotton to clean the tiny spots and leave them in the air to let them dry completely.
In case of earphones, remove the dust using a toothbrush while holding them upside down. In case of silicon tips on your earphones, dislodge them and clean them separately using alcohol or soapy water.
6. Use wireless headphones or a speaker
Just in case if the headphones simply aren’t doing well after making changes in the settings, then switching to a smart speaker might be a good option for you.
At the point when you’re in one spot and need an approach to tune in to your device without managing earphones, speakers are the best approach. Particularly since Bluetooth and WiFi gadgets are now more commonly available.
Nowadays, Bluetooth speakers have gotten significantly more reasonable for their size-to-uproar proportion as of later. Finding a moderate headphone that puts out a lot of sounds should be genuinely basic.
7. Maximize your device volume
This one is the most basic and easiest step to perform if nothing listed above works out. Normally your device settings will be maximum, but when a headphone is connected to the device it has its own volume settings sometimes, so make sure to adjust them too.
You can recognize the issue in the headphone volume settings if your normal volume is maximum but still the volume produced by the headphone is not up to that maximum level. So its time to barge into headphone volume settings, you may see an advanced settings option there, click on that and adjust the volume, you may also be able to find a volume equalizer there and set the volume according to your level of choice.
8. Use a better-quality headphone
If you have tried almost every possible solution mentioned above, then it must be time for you to buy a new one. Some good quality headphones are quite expensive but there is always an option for buying a budget headphone with an enhanced sound experience. Some best headphones that you can buy with better sound quality are:
- Sony WH-1000XM4
- AKG Y50
- Klipsch T5M Wired
- Shure Aonic 3
- Jabra Elite 85H
- QuietComfort 35 II
- Philips PH805
- JBL Tune 750BTNC
Conclusion
Concerning modern technology being revolutionized in our everyday life, it has been observed that most of the headphones used by people fall short of the right amount of volume for their listening desires. However, there are many methods and techniques to enhance the performance of your headphones, but most people are unaware of it. So, here we gave you a brief idea and some top managing tips for your headphones that can simply be implemented to boost up the listening experience of your device.
But, most importantly, raising the volume too much might not be suitable for your ears and can cause damage, so be careful while altering your volume settings.
