How to Connect HP Envy 6055 to WiFi?
You can use two ways to connect your Wi-Fi with the HP envy 6055, 6052, and 6000;
- HP Smart App
- WPS button
Use either method for wireless connection depending on your ease. The steps are the same for any HP Envy model.
1. Connect HP Envy 6055 with Wi-Fi via HP Smart App
Follow these steps to connect HP envy 6055 (6000, 6052) to Wi-Fi via HP smart app;
- First, open your device (mobile or laptop) and install the HP smart app on it.
- Next, press the wireless button present at the back of the HP printer for 10 seconds.
- The power button and amber light will flash on the printer.
- Open the HP smart app on the device (mobile or laptop) and select the ‘Set up a new Printer’ option.
- Choose your HP Envy 6055 printer from the list and select ‘Set Up’.
- Now follow the on-screen instructions.
- You must choose the SSID (your Wi-Fi name) and enter your Wi-Fi password.
- The app will automatically install the drivers for your HP Envy and connect it to the Wi-Fi.
2. Connect HP Envy 6055 with Wi-Fi via WPS Button
If there’s a WPS button on your router, the printer will connect to the Wi-Fi with just the press of a button.
Here’s how to wirelessly connect the HP Envy 6055 (6000, 6052) to Wi-Fi with a WPS button;
- First, you have to press the wireless button present at the backside of the printer.
- A blue light will flash on the printer.
- Now press the WPS button on the backside of the router. Make sure it’s near your printer.
- Wait for 3 minutes or until the flashing lights on the router and printer become solid.
- Once the lights are solid, the printer will wirelessly connect to your Wi-Fi.
If the wireless connection fails for some odd reason, reset your printer and follow the steps above.
How to Reset the HP Envy 6055?
Follow these steps to reset the HP envy 6055;
- Switch on the HP printer.
- Press the wireless button present at the backside of the printer and the Cancel button present on the front for 20 seconds.
- Your printer will reset to factory default, and you can set it up again.
FAQ
How to connect the HP envy 6000 to Wi-Fi?
You can connect the HP envy 6000 to Wi-Fi by pressing the WPS button on the router. If this doesn’t work, install the HP smart app, and enter your Wi-Fi password to enable the wireless connection.
Why is the HP envy 6000 not connecting to Wi-Fi?
The HP Envy 6000 printer may not connect to Wi-Fi due to various reasons:
- Incorrect Wi-Fi credentials:Double-check the entered network name (SSID) and password for accuracy.
- Weak Wi-Fi signal:Ensure the printer is within range of the router and no physical obstructions are blocking the signal.
- Network issues:Verify the Wi-Fi network is working properly and try restarting the router.
- Outdated Firmware:Install any available firmware updates from the HP support website.
- Incorrect network settings:Follow the printer’s manual to reset network settings to default.
Conclusion
We hope your HP envy 6055 is connected to the Wi-Fi successfully. If the printer doesn’t connect, you should look for firmware updates and restart the printer. You can also reach out to the HP support team.
